Knowledge Base
1-10
| 21-30
| 31-40
| 41-50
| 51-60
| 61-70
| …»
| 81-87
Updating old Licom CAD/CAM NC program files
Refer to attached document for updates techniques from Ultrapath days onwards...
Andy Hadley
Lic0om Systems UpdateDocument.zip
[...]
Licomnet installation (UK only)
I recently installed Licomnet at a customer who was using Windows 95. Internet Explorer 5.0 was not standard with Windows 95 and so it was
[...]
Error in MFC42.DLL
This is one of the most common faults reported to our UK support office.
The symptoms are that AlphaEDIT will open without any problem, but the
[...]
10 Base T Networking Connections
Please refer to the attached document.
Andy Hadley
Licom Systems
10BaseT Connect.zip
[...]
Fadal Rotary/Index post
It's common to produce 2 post processors for a 4-axis machining centre. One for "Indexing" programs using workplanes & One for "Rotary" programs.
For Rotary posts
[...]
Too Many Users After Changing Network Card
Symptoms
After changing a network card on one of your AlphaCAM workstations that are using a network hasp key you consistantly get a Too many users
[...]
Upgrading to Windows 2000
It appears that the first PC's are shipping with Windows 2000 as of today.
From our testing internally we can confirm that AlphaCAM functions perfectly with
[...]
Alpha 2000 - 3D Simulation problem fixes + tips
Some people have reported problems with 3D Simulation. Sometimes the simulation runs very slowly, or stops running at all, or even crashes the system. If
[...]
Accuracy when Joining Elements
Have you ever experienced trying to join 2 geometry elements, but they never will join?
One of the reasons for this is that if you zoom
[...]
Onepost Post Processors
When editing Onepost 'post processors' it is essential that each line length in the post processor does not exceed 110 characters. In alphaEDIT use the
[...]
1-10
| 21-30
| 31-40
| 41-50
| 51-60
| 61-70
| …»
| 81-87
